Directed Directechs DB3 Installation Manual

For toyota sienna hybrid 2022
Hide thumbs Also See for Directechs DB3:

Advertisement

Quick Links

403.TL17
DB3
v1.00
2022 Toyota Sienna Hybrid (Smart Key)

Advertisement

Table of Contents
loading

Summary of Contents for Directed Directechs DB3

  • Page 1 403.TL17 v1.00 2022 Toyota Sienna Hybrid (Smart Key)
  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming Module programming for convenience only (skip transponder) Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick Reference Guide (customer copy)
  • Page 3: Introduction

    This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 4: Vehicle Function Compatibilities

    Brake Status (foot brake) Control of aftermarket alarm with OEM remote Door Locks Status Fuel level/EV battery level E-Brake Status Key2GO Ignition Status Immobilizer Bypass-Data No Key Req'd Accessory Activation 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 5: Pre-Installation And Application Warnings

    [2] Tach: An optional connection required on some remote starters, which do not support a tach signal in D2D. [3] Power liftgate: This connection is only required if vehicle is equipped with a power liftgate. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 6: Wiring Diagram

    (white conn. left of dash fuse box) IMO: Green, pin 39 Control ECU (black conn. right of dash fuse box) Plug 2E (white conn. at dash fuse box) 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 8: Vehicle Connections

    Hybrid Vehicle Control ECU right of dash fuse box, black 54 pin plug, pin 25 Data Violet (IMI) H2/11 Orange/Black No Connection No Connection H2/12 Blue/Red (-) W2W Only - Unlock Output Remote Starter 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 9 H4/2 Black (-) Ground H4/3 Green (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 No Connection H5/2 No Connection 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 10 Left of Dash Fuse Box, white 25 pin plug (AD1), pin 8 White Starter Hybrid Vehicle Control ECU right of dash fuse box, black 54 pin Violet plug, pin 4 Tachometer [2] (program engine checking off) 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 11: Module Programming

    When the configuration is completed, reconnect the module. The LED will turn ON solid green for 3 seconds, then turn OFF. You have successfully completed the module programming sequence. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 12: Module Programming For Convenience Only (Skip Transponder)

    Press once (1) on the Push-to-Start (PTS) button to turn the ignition ON, then the LED shuts OFF. Press once (1) more on the PTS button to turn the ignition OFF. You have successfully completed the module programming sequence. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 13: Connecting The Module

    (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 14: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 18: Feature And Option List

    If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 19: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 20: Quick Reference Guide (Customer Copy)

    With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to do is put the gear in drive and drive off. 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.
  • Page 21 403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key) ©2023 Directed. All rights reserved.

Table of Contents