Vehicle Function Compatibilities - Directed Directechs DB3 Installation Manual

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.
Auto Headlamp Shutoff
Parking Lights Control
Arm Factory Security
Disarm Factory Security
Door Lock Control
Door Unlock
Driver Priority Unlock
Sliding Door Control Driver
Sliding Door Control Passenger
Trunk / Hatch Release
DS4+/DS3+/VSM3 Only
Control of aftermarket alarm with OEM remote
Fuel level/EV battery level
Key2GO
Immobilizer Bypass-Data No Key Req'd
Accessory Activation
4
403.TL17 1.00 2022 Toyota Sienna Hybrid (Smart Key)
©2023 Directed. All rights reserved.
Ignition Activation
Remote Start Takeover
SmartStart
Start (Crank) Activation
Starter / Ignition Interrupt
Tach / RPM Output
Entry Monitoring ALL Door Pins
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Factory Alarm Trigger Monitoring
Brake Status (foot brake)
Door Locks Status
E-Brake Status
Ignition Status