Introduction; Features; Boostxl-Drv8305Evm With Launchxl-F28027F - Texas Instruments BOOSTXL-DRV8305EVM User Manual

Introduction

2 Introduction
The BOOSTXL-DRV8305EVM BoosterPack is a complete 3-phase driver stage in order to evaluate motor
application with the DRV8305 motor gate driver. It utilizes a compact and modular form factor for ease of
use and is designed to dock with compatible TI LaunchPad™ development kits for a complete motor
control system.
2.1

Features

The following lists the BOOSTXL-DRV8305EVM features:
• Complete 3-phase drive stage in a compact form factor (2.0 in × 2.2 in)
• Supports 4.4- to 45-V voltage supply and up to 15-A RMS (20-A peak) drive current
• 6x CSD18540Q5B N-Channel NexFET™ Power MOSFETs (1.8 mΩ)
• Individual motor phase and DC bus voltage sense
• Low-side current shunt sense for each half-bridge
• Fully protected drive stage including short circuit, thermal, shoot-through, and undervoltage protection
• LMR16006 wide voltage input, 0.6-A step down buck regulator for MCU supply
• Combine with compatible LaunchPad XL kits to create a complete 3-phase motor control platform
• Optimized for the Piccolo™ LAUNCHXL-F28027F LaunchPad to support the InstaSPIN-FOC™
sensorless motor control solution
Figure 5. BOOSTXL-DRV8305EVM With LAUNCHXL-F28027F
4
BOOSTXL-DRV8305EVM User's Guide
Copyright © 2015–2017, Texas Instruments Incorporated
SLVUAI8A – August 2015 – Revised June 2017
Submit Documentation Feedback
www.ti.com