Table of Contents
Advertisement
Quick Links
www.ti.com
User's Guide
BOOST-LDC3114 Evaluation Module User's Guide
This user's guide describes the characteristics, operation, and use of the BOOST-LDC3114 Evaluation Module
(EVM). Complete schematic diagrams, printed-circuit board layouts, and bill of materials are included in this
document.
1
Overview..................................................................................................................................................................................2
Contents...............................................................................................................................................................3
Sensors...........................................................................................................................................................3
Elements...........................................................................................................................................................3
GUI...................................................................................................................................................................................4
Requirements........................................................................................................................................................4
2.2 Installation..........................................................................................................................................................................
2.3 Navigation..........................................................................................................................................................................
Updates..............................................................................................................................................................7
3
Schematic................................................................................................................................................................................8
4 Layout......................................................................................................................................................................................
5 Bill of Materials.....................................................................................................................................................................
Trademarks
All trademarks are the property of their respective owners.
SNOU181 - FEBRUARY 2021
Submit Document Feedback
ABSTRACT
Table of Contents
Copyright © 2021 Texas Instruments Incorporated
BOOST-LDC3114 Evaluation Module User's Guide
Table of Contents
4
5
9
10
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments BOOST-LDC3114EVM
Summary of Contents for Texas Instruments BOOST-LDC3114EVM
-
Page 1: Table Of Contents
2.3 Navigation..................................2.4 Firmware Updates................................7 Schematic....................................8 4 Layout...................................... 5 Bill of Materials..................................Trademarks All trademarks are the property of their respective owners. SNOU181 – FEBRUARY 2021 BOOST-LDC3114 Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 2: Overview
The EVM is comprised of two boards, the LDC board and the MSP board. This is set up as a boosterpack and allows the LDC board to be used with a different microcontroller. Figure 1-1. BOOST-LDC3114EVM Figure 1-2. LDC3114EVM and PAMB Controller BOOST-LDC3114 Evaluation Module User's Guide SNOU181 – FEBRUARY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 3: Evm Kit Contents
Overview 1.1 EVM Kit Contents Table 1-1 details the contents of the EVM kit. Contact the nearest Texas Instruments Product Information Center if any components are missing. Table 1-1. EVM Kit Contents Item Quantity BOOST-LDC3114EVM PAMB Controller Board Micro-USB Cable 1.2 Compatible Sensors... -
Page 4: Evm Gui
GUI, mouse over the download icon, select your operating system from the list and follow the installation instructions. Figure 2-1. Download Pop-Up BOOST-LDC3114 Evaluation Module User's Guide SNOU181 – FEBRUARY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 5: Navigation
Every 10 sec • Every 20 sec • Every 30 sec • Every 60 sec • As fast as possible Figure 2-3. Registers Page SNOU181 – FEBRUARY 2021 BOOST-LDC3114 Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... - Page 6 2.3.3 Settings The Settings page has select register settings that can be controlled directly, as well as GPIO settings. Figure 2-5. Settings BOOST-LDC3114 Evaluation Module User's Guide SNOU181 – FEBRUARY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
-
Page 7: Firmware Updates
9. Once the update is complete the EVM firmware should reboot and connect to the GUI. If it doesn't reconnect momentarily, press the RESET button OR unplug and plug in the USB cable to reconnect. SNOU181 – FEBRUARY 2021 BOOST-LDC3114 Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 8: Schematic
+3.3V +3.3V LDC3114PWR 4.70k 4.70k 1000pF 390pF Silk: BOOST-LDC3114EVM, SENS072A Header_2x1 Header_2x1 Silk: Draw Silkscreen box around red area Figure 3-1. Schematic BOOST-LDC3114 Evaluation Module User's Guide SNOU181 – FEBRUARY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 9: Layout
Layout 4 Layout Figure 4-1. Top View Layout Figure 4-2. Bottom View Layout SNOU181 – FEBRUARY 2021 BOOST-LDC3114 Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... -
Page 10: Bill Of Materials
RES, 0, 5%, 0.1 W, AEC-Q200 Grade 0, 0603 ERJ-3GEY0R00V Panasonic 0603 R13, R14, R15, 1.00k RES, 1.00 k, 1%, 0.1 W, 0603 0603 ERJ-3EKF1001V Panasonic R16, R19 BOOST-LDC3114 Evaluation Module User's Guide SNOU181 – FEBRUARY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated... - Page 11 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 12 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
- Page 13 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
- Page 14 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
- Page 15 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
- Page 16 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2021, Texas Instruments Incorporated...
- Page 17 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments BOOST-LDC3114EVM...