General Safety Tips; Unpacking The Printer And Accessories - Tharo Systems V Series User Manual

2. General Safety Tips

CAUTION!
During the print process the Printhead will become hot. Do NOT attempt to clean the Printhead
until it has had time to cool.
The Printhead is the Most Fragile part of your Printer. Do NOT use sharp or hard objects to clean
the Printhead. Do NOT touch the glass surface of the Printhead with your hand.
This Printer is built exclusively to print labels, tickets and tags, continuous paper, etc. Only use
media that is recommended for a direct thermal or thermal transfer Printer.
The Printer is configured for input voltages of 110 to 240 V. Connect only to a power outlet with
a grounded contact. Always ensure the Printer is switched OFF before connecting the power
cord to an electrical outlet.
Do not expose the Printer to moisture or operate it in wet or damp areas.
Remove the power cord from the rear of the Printer when disconnecting or attaching accessories
such as Stripper Sensors, Cutters, etc.

3. Unpacking the Printer and Accessories

Check the condition of the packaging and contents for possible damage during transit.
NOTICE: Please retain original boxes and all original packing materials in
case the Printer must be returned.
In addition to this manual the following items should be included with your Printer:
Bar Code Printer
Power Cord (110V or 230V)
Switching Power Adapter
Ribbon Shaft, Qty. 2
Label Roll Core
Empty Ribbon Roll
Quick Start Guide
Accessories CD: Includes Label Software, Manuals, Windows Drivers and CUPS Driver.
The following additional items are necessary for generating labels from your Printer:
Serial, Parallel, or USB cable
Applicable media (label stock/ribbon)
6