Label Installation - Tharo Systems V Series User Manual

Label Installation

1. Open the Printer's Top Cover
by pressing the Open Cover
Buttons on both sides.
2. Place the roll of label stock
onto the Label Roll Core and
place it in the Printer.
3. Release the Print Mechanism
by pushing in on the Head
Latches. The Print
Mechanism will now rotate
up.
4. Feed the label through the
two Label Guides to the
Tear-off Bar.
5. Align the label guides to the
label edge.
6. Close the Print Mechanism by
firmly pressing down on it.
You will hear a click when the
Print Mechanism has been
secured.
15