Tharo Systems V Series User Manual page 23

5. Position the Cutter as
shown.
6. Pull up on the Cutter's
Stainless Cover to
release the Cutter and
then flip the Cutter
Module open.
7. Hold the Cutter Module
while tightening the
screws.
8. Pull on the Cutter's
Stainless Cover to
release the Cutter and
then rotate the Cutter
back into place.
9. Close the Print
Mechanism by firmly
pressing down on it.
You will hear a click
when the Print
Mechanism has been
secured.
22