Thermal Printhead Replacement - Tharo Systems V Series User Manual

Thermal Printhead Replacement

1. Switch the power to
the Printer off and
unplug the Printer.
2. Open the Printhead
and remove the
media from the
Printer.
3. Remove the
Printhead Carriage
Screw as shown.
4. Once the Printhead
Carriage Screw is
removed, the
Printhead Carriage
will drop down and
provide access to
the Printhead
Screws.
5. Remove the two
Printhead Screws
6. Remove the plastic
Printhead Guard
from beneath the
Printhead and the
Printhead will hang
from the Carriage
by the Printhead
Cable
7. Gently unplug the
Printhead Cable
from the Printhead.
8. Reverse these steps
to re-install the
Printhead.
30