Thermal Printhead Print Line Adjustment; Thermal Printhead Spring Box Pressure Adjustment - Tharo Systems V Series User Manual

Thermal Printhead Print Line Adjustment

When printing on stiff or thick paper, the Print Line needs to be moved forward (paper feed direction) in
order to achieve better print quality.
1. Release the Print Mechanism
by pushing in on the Head
Latches. The Print
Mechanism will now rotate up.
2. Turning the Print Line
Adjustment counterclockwise
(as arrow 1 shows) will move
the Printhead in the direction
of arrow A.
3. Turning the Print Line
Adjustment clockwise (as
arrow 2 shows) will move the
Printhead in the direction of
arrow B.

Thermal Printhead Spring Box Pressure Adjustment

If one side of the printed labels is not being printed clearly, or if ribbon wrinkles occur, then adjust the
Thermal Printhead Spring Box Pressure to cure the problem.
1. Open the Top Cover.
2. Remove the Thermal Transfer
Ribbon.
3. Turn the Printhead Adjustment
Screws to increase or decrease
the Printhead pressure.
A
B
- - - - + + + +
+ + + +
29
1 1 1 1
2 2 2 2
- - - -