Installation Requirements - HearthStone Aurora 8900 Series Owner's Manual

Hearthstone Quality Home Heating Products, Inc
Several issues must be addressed when selecting a suitable location for your ORION 16 fireplace. The
minimum clearances to combustible construction are listed below. In addition, access to the gas supply must be
considered. The location of the fireplace will also affect the venting requirements and you must be certain the
location will allow compliance with the venting requirements shown on pages
your installation provides adequate accessibility clearance for servicing and proper operation.
Installation and repair should be done by a qualified service person. The appliance should be inspected before
use and at least annually by a professional service person. More frequent cleaning may be required due to
excessive lint from carpeting, bedding material, etc. It is imperative that the control compartment, burners and
circulating air passageways of the appliance be kept clean.
MINIMUM CLEARANCES TO COMBUSTIBLE CONSTRUCTION
Fireplace to L. Side Wall
Fireplace to R. Side Wall
Fireplace to Corner Wall
Vent Pipe to Adjacent Materials
*Mounting plate bosses contact the wall
**The minimum required clearance to be maintained from the fireplace to combustible flooring is
measured from the top surface of carpeting, tile, etc.

Installation Requirements

6" (152mm)
6" (152mm)
6" (152mm)
1.5" (38mm)
8-15. You must also insure that
Fireplace to Ceiling
Fireplace to Rear Wall
Fireplace to Floor
ORION 16 Series 8900
8" (203mm)
0" (0mm)*
3" (76mm)**
6