HearthStone Aurora 8900 Series Owner's Manual page 34

Hearthstone Quality Home Heating Products, Inc
Installing the Fireplace Surround with Integrated Screen
The decorative surround with integrated screen
for the fireplace is held in place by four brackets.
Two are located on the top of the fireplace and
two on the bottom. There are mating brackets
and catch plates on the surround itself. Refer to
the adjacent illustrations when installing the
surround.
1. Unpack the surround with integrated screen
from shipping box.
2. With a helper, lift the surround with integrated
screen up and identify the top by looking for
the vertical brackets that are visible from the
rear of the surround.
3. Move the surround with integrated screen into
place, generally centering the surround
opening over the glass panel. Keep the
bottom of the surround tipped slightly away
from the fireplace.
4. While looking behind the surround with
integrated screen, guide the two surround
brackets onto the forward detent of the mating brackets on the fireplace top. You might find it easier to
engage one bracket and then the other. Lower the surround until both bracket sets are fully mated.
5. Carefully push the top of the surround with integrated screen so that the surround brackets slide into the
rear detent of the mating brackets on the fireplace top.
6. Carefully swing the bottom of the surround with integrated screen toward the base of the fireplace until the
catch plates on the bottom flange of the surround are aligned with the spring loaded plungers on the bottom
flanges of the lower surround mounting brackets.
7. To remove the surround with integrated screen, pull the bottom edge of the surround outward to disengage
the spring loaded plungers and then lift the top up and off the upper brackets.
8. To prevent damage to the surround with integrated screen, always set the surround in a safe place while it
is removed from the fireplace.
ORION 16 Series 8900
34