Insert Batteries - HAKO Sweepmaster 980 R Instruction Manual

First Operation
4.2

Insert Batteries

- Turn engine off and pull key
- Secure machine by engaging the
parking brake.
- Fold back seat hood.
- Insert batteries into the battery tray
from the top.
Insert batteries
24
6V/240Ah, GiV maintenance-free
- Connect batteries and enclosed ca-
ble set according to Fig. 7 (check for
tight seating) and grease poles.
- Check set battery type at the low di-
scharge signal sender or set if
required.
- Connect charging plug of the battery
connection cable and cable of the
Fig.6
charger unit and proceed to initial
charging.
- After charging of the batteries, con-
nect charger plug and device plug
for electrical connection.
Now the Hako-Jonas 980 E/EH is
Sweepmaster B980 R/RH is
operable.
If the battery type setting at
the LDS should be incor-
rect, have the setting modi-
fied by qualified personnel
in an approved workshop.
Fig.7