Table of Contents
Advertisement
Description
2.2
Cylinder Broom
The cylinder broom is equipped with
12 rows of bristles arranged in V-
shape.
The cylinder broom width amounts to
700mm and its diameter to 345mm.
2.3
Side Brush
The standard version, the side brush
is located at the front right of the
machine. The operator lifts and lowers
it by hand lever.
The side brush is to have a light incli-
nation.
The swinging area of the side brush
arm is limited by stop screws.
The side brush is driven by V-belt.
For special application, fitting of a
second side brush at the left is possi-
ble.
2.4
Filter System / Dust Evacua-
tion
The filter system is located in the filter
case above the dirt hopper. The suc-
tion fan transports the fine dust raised
by the cylinder broom to the plate filter
where it is separated. The fine dusts
sets at the outsides of the filter blades.
In case of heavy dust deve-
lopment, check and clean
the plate filter at regular
intervals.
2.5
Shaking System
Due to normal working vibration the
set dust partly falls off into the dirt
hoper. To ensure working in a dust-
free ambiance, however, actuate the
shaking system regularly.
2.6
Steering
Steerage is effectuated mechanically
from steering wheel to front wheel via
chain. This chain is to be re-adjusted
as required.
2.7
Wheels
2.7.1 Hako-Jonas 980 E
Sweepmaster B980 R
Front wheel: solid rubber tires
Rear wheels: solid rubber tires
2.7.2 Hako980 EH
Sweepmaster B980 RH
Front wheel: solid rubber tires
Rear wheels: solid rubber tires
17
Advertisement
Table of Contents
