HAKO Sweepmaster 980 R Instruction Manual page 34

Operation
Lift side brush and cylinder
broom before removal of
the dirt hopper.
Riding with the lifted hopper
reduces stability of the ma-
chine significantly. For this
reason, do not lift the hop-
per but just before empty-
ing. Before lifting the hop-
per, the operator has to
make sure that no persons
or objects are behind or
next to the machine. Stop
the machine on level
ground before lifting the
hopper.
Keep clear of the hazard zo-
ne!
34
Pinching and shearing ha-
zard. Provide for required
safe distance before lifting
or lowering the dirt hopper.
Sweepmaster B980 RH Hako-Jonas 980 EH control panel
1 Release switch for lifted-up disposal
function
2 Dirt hopper, lift and lower
Proceed to emptying of the dirt
hopper as follows:
- Lift side brush and cylinder broom
- Proceed to shaking of the filter
system
- Actuate switch (Fig. 13/1) and hold
(dirt hopper is released)
- Actuate switch (Fig. 13/2) by
pushing = lift dirt hopper
- Dirt hopper (Fig. 12/3) is lifted-out
- Back the Hako-Jonas 980 EH until
Sweepmaster B980 RH until
the dirt hopper is positioned above
the container for disposal.
- Pull the safety knob (Fig. 14/1) of
the release lever (Fig. 14/2).
- Release swinging of the dirt hopper
by release lever (fig. 14/2).
Fig.13
- The Hako Jonas 980 EH away from
Sweepmaster B980 RH away from
the disposal container forward drive.
- Lower dirt hopper by actuating
switch (Fig. 13/1) and switch (Fig.
13/2) = lower dirt hopper