Table of Contents
Advertisement
3
or
to the required waypoint and press the
Menu Select button directly below Sel .
The display shows the distance and bearing from the
current to the selected coordinates.
Location Feature in Emergency Mode
When the Emergency feature is activated by pressing the
emergency button, the radio exits the Location menu and
returns to the Home (default) screen so that you can see
which channel the emergency signal is going out on.
However, you may re-enter the Location menu while still in
emergency mode, provided that Silent Emergency has not
been activated.
If you have turned Location off using the ON/OFF menu
key, it automatically turns back on when Emergency is
activated.
If there is a solid location signal during Emergency, the
current location and the location information received is
saved as Emergency and Last Known Location waypoints,
respectively.
Geofence (ASTRO 25 Trunking
System)
Geofence is a virtual perimeter based on the GPS to define
a geographical area on earth.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
When the radio enters the predefined Geofence area, your
radio receives the Dynamic Regroup command from the
system and immediately connects to a Dynamic Regroup
talkgroup. The radio display shows the new selected
Dynamic Regrouped talkgroup with green intelligent light
for your attention.
On top of that, additional features are Voice Announcement
of the new channel, and also direct content display of a text
message to indicate that you are currently at Geofence
area. Check with your nearest qualified technician on the
requirements for these enhancements to work in Geofence.
Any new text messages received at Geofence shall have
its content displayed immediately on the radio display.
NOTICE:
If the radio is set up in DVRS, only mobile radio is
supported for this feature.
English
155
Advertisement
Table of Contents
