Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information; Utilities; Using The Flip Display - Motorola APX 7000 User Manual

Adjusting the Volume of the Radio from Bluetooth
Audio Device
Procedure:
With the Bluetooth audio device connected to the radio:
1
Adjust volume up/down on the bluetooth audio device.
2 The radio display shows VOL XX and sounds a short,
medium-pitched tone.

Clearing All Bluetooth Devices Information

1
Long press the preprogrammed Bluetooth On/Off button. A
short, medium-pitched tone sounds.
The display shows PLS WAIT to indicate clearing is in
2
progress.
The display shows ALL CLR to indicate clearing is
3
successful.
OR
The radio sounds a short, low-pitched tone. The display
shows CLR FAIL to indicate clearing has failed.
Note: If Re-Pair Timer is set to infinite and you clear keys on
the radio, you must clear keys on all previously paired
devices as well. (Please see your accessories manual
for further details.)
50
English

Utilities

Using the Flip Display

This feature allows you to reverse the content of the top display
upside down. It is particularly useful when you would like to read
the top display while the radio is still in the carry holder attached
to your belt.
Procedure:
Press and hold the preprogrammed Light/Flip button to reverse
the display.

Selecting a Basic Zone Bank

This feature allows twice as many zones to be accessed from a
switch, doubling the amount of switch positions.
Note: The Zone Select feature must be preprogrammed to
the 3-position A-B-C switch, while the Basic Zone Bank
feature must be preprogrammed to any side button or
Top (Orange) button before you can use this feature.