Table of Contents
Advertisement
English
b. Press and hold the Menu Select button directly
below ZnUp or ZnDn until the required zone
appears.
Positions of ZnUp and ZnDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c. Press the PTT button to transmit on the displayed
zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/receive frequency pairs. Do one of the following to
select a radio channel. You can use the options
interchangeably depending on your preference and the
programmed functions.
•
Select a channel using the preprogrammed 16–
Position Select Knob to the desired channel.
a. Rotate the preprogrammed 16–Position Select
Knob to the desired channel.
b. Press the PTT button to transmit on the displayed
zone channel.
•
Select a channel using the radio menu Chan :
66
a.
or to Chan.
b. Press the Menu Select button directly below
Chan .
c.
or
to the required channel or use the
keypad to enter the channel number.
If the channel number entered is unprogrammed,
the display shows Invalid entry. Repeat this
step.
d. Press the Menu Select button directly below Sel
to confirm the selected channel.
e. Press the PTT button to transmit on the displayed
zone channel.
•
Select a channel using the radio menu Channel Up
or Channel Down:
a.
or
to ChUp or ChDn.
b. Press the Menu Select button directly below
ChUp or ChDn.
Positions of ChUp and ChDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
Advertisement
Table of Contents
