2 Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3
or
to Tactical Inh Encode Pswd.
4 Press the Menu Select button directly below Sel .
5 Enter the old password.
6 Press the Menu Select button directly below Ok .
7 Enter the new password.
8 Press the Menu Select button directly below Ok .
9 Re-enter the new password.
10 Press the Menu Select button directly below Ok .
The password is updated.
If the two passwords do not match, repeat
through
step
10.
Enabling or Disabling the Radio Lock
Feature (Secure Radios Only)
This feature allows you to enable or disable the radio lock
feature. It is programmable by a qualified radio technician.
1
or to Logf.
2 Press the Menu Select button directly below Logf.
One of the following results occur:
•
The display shows Pswd enabled, indicating that the
radio lock feature is enabled.
step 5
•
The display shows Pswd disabled, indicating that the
radio lock feature is disabled.
NOTICE:
If you enter three incorrect passwords, the
radio exits the password feature. You cannot
access this feature again until you turn the
radio off and on.
English
143