Table of Contents
Advertisement
English
System Setup for ASTRO Advanced
Messaging Solution
Your user name, unit ID and password all need to be
provisioned in PremierOne
PremierOne needs to be linked to an RSA account
specifying a token to be used with the Two-Factor
passcode.
The radio caches the user name, unit ID and or Single
Factor password in the codeplug, this allows the radio to
automatically log in to use Single Factor authentication
upon power up or mode change. The Two-Factor passcode
is not stored in the codeplug. You can upgrade the Single
Factor session to a Two- Factor session by entering the
Two-Factor passcode only. After an interruption (for
example mode change, DSR switch over, power loss) , the
radio is capable of restoring the active session in its current
state as long as the session is active in the server.
NOTICE:
Power down occurs when the user intentionally
powers off the radio, power loss is when the battery
dies or is removed from the unit.
130
™
. Your user account in
Two-Factor Authentication
Two-Factor Authentication is an extension of existing ARS
and TMS operation. This feature allows you to authenticate
yourself with a username, unit ID, password, and
passcode.
This feature allows the sender of a text message to
address a specific user of the radio, so the message is
delivered to the user, and not anyone else who may have
been using the radio at the time.
This feature supports query authentication requirements so
the query service knows which user originated a query.
You can still send text messages without logging in as a
user. The user log in feature only enables the recipient of
your message to identify you as the sender by assigning a
username to your message.
NOTICE:
A predefined username that is set more than the
maximum allowed characters is an invalid name.
Logging in using the Two-Factor
Authentication
1 Perform one of the following actions:
Advertisement
Table of Contents
