Danfoss VLT Refrigeration Drive FC 103 Operating Instructions Manual page 45

Electrical Installation
electrical noise back onto the power grid. Isolate control
wiring from high-voltage power wiring. See Illustration 4.4.
When screened/armoured cable is not used, at least 3
separate conduits are connected to the panel options
cabinet.
Stop
Start
Line Power
Speed
Control
Illustration 4.4 Example of Proper Electrical Installation Using
Conduit
MG16N102
Operating Instructions
Motor
Danfoss A/S © 08/2015 All rights reserved.
4 4
41