Active Filter Parameter Lists - Danfoss VLT Refrigeration Drive FC 103 Operating Instructions Manual

Appendix A - Parameters

9.3 Active Filter Parameter Lists

9.3.1 Default Settings
Changes during operation:
True means that the parameter can be changed while the active filter is in operation, and False means that the unit must be
stopped before a change can be made.
4-Set-up:
All set-up: The parameter can be set individually in each of the 4 set-ups, (1 single parameter can have 4 different data
values).
1 set-up: Data value is the same in all set-ups.
SR:
Size-related.
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading with an active filter.
Conv. 100
index
Conv. 1
factor
9 9
Table 9.1 Conversion Index
Data type
2
3
4
5
6
7
9
33
35
54
Table 9.2 Data Type and Description
104
75 74 70 67 6
3600000 3600 60 1/60 1000000 100000 10000 1000 100 10
Description
Integer 8
Integer 16
Integer 32
Unsigned 8
Unsigned 16
Unsigned 32
Visible string
Normalised value 2 bytes
Bit sequence of 16 boolean variables
Time difference without date
Danfoss A/S © 08/2015 All rights reserved.
®
VLT Refrigeration Drive FC 103 Low Harmonic Drive
5 4 3 2 1 0 -1 -2 -3 -4
1 0.1 0.01 0.001 0.0001 0.00001
-5 -6
0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
MG16N102