Ssh; Telnet; Dhcp - ABB RER601 Technical Manual

Wireless gateway
Hide thumbs Also See for RER601:
Table of Contents

Advertisement

Section 5
RER601/603 Configurator
5.6.2
5.6.3
5.6.4
40
GUID-6CC9C46D-7A66-4625-8885-23CFA059020E V1 EN
Figure 26:
WWW server settings
Web Server enables or disables the WWW server.
Web Configuration Access enables or disables the Web configuration access.
If the Web access settings are disabled, the Web configurator stops
functioning and it must be enabled via the console.

SSH

The SSH server is available in the device for secure connections. The configuration
file is located at /etc/sshd_config. It can be edited manually.
SSH Server enables or disables the SSH server.

Telnet

A Telnet server can be used to make terminal connections to the device shell. A
more secure way of performing remote management is based on the SSH.
Telnet server enables or disables the Telnet server.

DHCP

The DHCP server listens to broadcast DHCP queries and assigns an IP address for
the host from the configured pool. If needed, the device can act as a DHCP server.
This is suitable for small remote networks that have, for example, few laptops
connected to the device via an Ethernet hub or a switch.
1MRS757105 B
RER601/603
Technical Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rer603

Table of Contents