Assembly; Warning Notices - Beko CLEARPOINT S040 Installation And Operation Manual

CLEARPOINT ® water separator

7. Assembly

7.1 Warning notices

DANGER Use of incorrect spare parts, accessories or installation materials!
The use of incorrect spare parts, accessories or installation materials, as well as auxiliary and
operating materials, may result in death or serious injury. In addition, malfunction and device
failure or material damage can occur.
•
•
•
DANGER Pressurised system!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed air or through bursting system parts
•
•
•
•
•
•
•
•
•
•
•
WARNING Insufficient qualification!
Insufficient qualification of the personnel can lead to accidents, personal injury and damage to
the device as well as impairments during work on the operating material.
All work on the product may only be carried out by appropriately qualified skilled personnel.
CAUTION Inappropriate assembly!
Inappropriate assembly of the product can lead to personal injury and product damage as well as
impair operation.
•
•
26 | 56
For all installation, servicing and maintenance work, only use undamaged original parts,
auxiliary and operating materials which are specified by the manufacturer.
Only use fittings and connecting elements approved for the respective application as well as
suitable tools in perfect operating condition.
Only use pipes that are free of dirt, damage and corrosion.
All work on the system must be carried out in the depressurised state and with the system
secured against unintentional pressure build-up.
Set up a safety zone around the system during all assembly, installation, maintenance and
repair work.
Before applying pressure to the system, check all pipe connections and tighten if necessary.
Slowly pressurise the system with compressed gas.
Avoid pressure blows and high differential pressures.
Assemble all pipes without mechanical stress. Avoid any vibrations occurring in the pipe
network by using vibration dampers.
The pipes must be able to bear the additional weight of the separator. Additional fixings must
be mounted if necessary.
Always keep exactly to the installation and operating instructions given in this manual.
Always keep inspection and maintenance interval exactly.
Install fixed pipes as supply and discharge drains.
Do not carry out any structural changes to the product.
The direction of flow of the separator must match the direction of flow in the pipe.
The separator must be fitted vertically in the pipe.
Installation and operation manual