Air Shrouds; Replacing The Air Shroud - Supermicro SuperServer SYS-110P-FRN2T User Manual

Air Shrouds

The SYS-110P-FRN2T/FRDN2T supports two air shrouds, one to direct airflow to the CPU
and another to direct airflow to the PCIe cards. There are two types of PCIe card air shrouds,
one for full-height cards and one for half-height cards.

Replacing the Air Shroud

1. Position the air shrouds in the chassis, as illustrated below. The air shroud fits just
behind the fans.
2. Slide the air shroud into the grooves just behind the fan rack. If necessary, move any
cables that interfere with the air shroud placement.
3. Remove perforated tabs, if necessary, for a good fit.
Chapter 3: Maintenance and Component Installation
Lever
Figure 3-9. Replacing the System Fans
48