Prime The Pump - Graco G3 Pro Instructions Manual

Setup

Prime the Pump

NOTE: It is not necessary to prime the pump every time
the pump is filled with lubricant.
Pump only requires priming the first time it is used, or if
it is allowed to run dry.
1. Loosen pump element fitting (F . 22).
IG
NOTE: When loosening pump element fitting, do NOT
loosen pump element. Loosening pump element will
change the output volume
F . 23
IG
3. Tighten pump element fitting using two wrenches
working in opposite directions (F . 22).
IG
F . 22
IG
2. Only run pump until air is no longer dispensed with
the lubricant coming out of element fitting (F . 23).
IG
24 332298M