Graco G3 Pro Instructions Manual page 30

Pro Model Setup
Delaying the prelube function may be desired if other
critical functions or systems of the machine or vehicle
are also coming on line during power up.
1. Prelube Delay is set in
MM:SS (minutes and
seconds). To set the time use
the UP or DOWN ARROW
button to scroll through
numerals 0 to 5 until the
desired number appears in the first MM (minutes)
field.
The maximum length of time Prelube Delay can be
set to is 59:59 (59 minutes:59 seconds).
2. Press the ENTER button to lock in the
selection. The next MM number field to
the right flashes indicating it is ready for
programming.
3. Use the UP or DOWN
ARROW button to scroll
through numerals 0 to 9 until
the desired number appears
in the second MM number
field.
4. Press the ENTER button to lock in the
selection.
The next number field to the right
flashes and the LED lights under SS; indicating it is
ready to program the seconds fields.
5. Repeat steps 1 - 4 to set the SS (seconds) fields.
6. After pressing the ENTER button to set
the last SS field the G3 automatically
switches to the RUN MODE.
30 332298M