TechniSat MULTYRADIO 600 CD IR Manual page 80

> Under [Set time zone], select the current time zone in your location and,
under [Summertime?] you determine whether summertime should currently
be active. This setting is displayed only if you have previously selected NET
update under the update settings.
19.5 Language
> Press the MENU button and then select [System settings] > [Language].
> Using  or , select one of the available Menu languages and confirm by
pressing OK.
19.6 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations may no longer be received. In this case you can reset the device
to factory settings to delete all the saved stations and then launch a new scan.
> Press the MENU button and then select [System settings] > [Factory
settings].
> Confirm by pressing OK.
> Use  or  to select > YES and confirm the confirmation prompt by
pressing OK.
All previously stored stations and settings will now be deleted. After resetting,
you can start the Setup wizard (Section 19.8).
19.7 Software update
From time to time software updates may be provided which can contain
enhancements or error fixes. This ensures that the MULTYRADIO 600 CD IR is always
up to date.
> Press the MENU button and then select [System settings] > [Software
update].
> Select [Auto Update] if the MULTYRADIO 600 CD IR should search for new
software versions periodically.
> Select [Check now] if you want to check immediately whether a new
software version is available.
If a software update has been located, follow the instructions on the display.
In order to find software updates and upload them, the MULTYRADIO 600
CD IR must be connected to the Internet. Do not switch off the MULTYRADIO
600 CD IR during the update process!
80