TechniSat MULTYRADIO 600 CD IR Manual page 69

By pressing the INFO button several times, different information can be
scrolled through, such as station type, multiplex name, frequency, signal error
rate, data bit rate, station format, date.
12.9 Dynamic Label Plus
If supported by the programme provider, the Dynamic Label Plus service also allows,
for example, the name of the current programme or the track and artist to be
displayed.
12.10 Setting DRC
The compression rate balances dynamic fluctuations and thereby any volume
variations that occur.
> Press the MENU button and select > [Volume Adjustment], to select the
desired compression rate.
> Select the compression rate using the / buttons:
DRC high
DRC low
DRC off
> Confirm by pressing OK.
12.11 Deleting inactive stations
> Press the MENU button and use  or  to select > [Delete inactive
stations].
> Confirm by pressing OK.
> Using  or , select > [Yes] and confirm by pressing OK.
12.12 Sorting the stations
> Press the MENU button and then  or  to select > [Station order].
> Select a sorting type with  or  and confirm your selection with OK.
You can now choose between: Alphanumeric and provider.
13 FM radio
13.1 Switching on FM radio mode
> Press the MODE button as often as required until [FM Radio] appears on the
display, or press the [FM (13) (13) button on the remote control.
Alternatively:
> Press the MENU button and then select [Main Menu > FM].
When you switch on the radio for the first time, the frequency is set to 87.5 MHz.
- high compression
- low compression
- compression switched off.
DE
EN
NL
69