TechniSat MULTYRADIO 600 CD IR Manual page 64

8 Menu navigation
Menu navigation primarily takes place using the MENU,/, BACK and OK buttons
on the remote control, or the MENU/INFO, BACK buttons and the Select rotary
knob on the device.
The device menu is divided into the respective Submenu for the currently selected
source, the Main menu and the System menu. To open the submenu of the
currently selected source, press the MENU key.
You can navigate through the settings and options using the / buttons on the
remote control or by turning the Select rotary rotary knob on the device. Press the
OK button on the remote control or the Select rotary knob on the device to make a
selection or to activate a function.
An asterisk "*" highlights the current selection.
> Press the BACK button to move back a step.
Closing the menu: Press MENU several times or wait for approx. 15 seconds.
8.1 Selecting the source
> Press the MODE button as often as required until the desired source is shown
on the display. You can also press the corresponding source selection button
(13) directly on the remote control.
Alternatively:
> Press the MENU key.
> Use the  or  buttons to select the entry [main menu] and confirm your
selection with OK.
> Use the  or  buttons to select the desired source and confirm your
selection with OK.
9 Internet Radio and Podcasts
The MULTYRADIO 600 CD IR is equipped with an Internet radio receiver.
In order to receive Internet radio stations/broadcasts/podcasts you need a WiFi
router with Internet access.
> Press the MODE button repeatedly until [Internet Radio] or [Podcast]
appears on the display, or press the IR (13) button on the remote control.
Alternatively:
> Press the MENU button and then select [Main menu > Internet radio] or
[Podcasts].
If you are starting Internet radio operation for the first time without
having configured a WiFi connection during the initial setup, you must
first set up a WiFi connection. More information in Section „19.3 Internet
settings" at Page 78.
64