TechniSat MULTYRADIO 600 CD IR Manual page 79

19.3.2 WPS connection
> Select [Internet settings > PBC WiFi set up] if your router has the WPS
function. This establishes a direct connection to the router without having to
enter the - WiFi password.
How you activate WPS on your router can be taken from its instruction
manual.
> Start WPS on your router by pressing the relevant button. Note the
Instructions on the MULTYRADIO 600 CD IR display.
19.3.3 More information about the network connection
To find out more about the current connection select [Show settings].
Select [Manual settings], if you know your network parameters and you
would like to configure them manually. Take note of the instructions on the
display.
The menu item [Net Remote PIN] can be used to configure the PIN for the
control with the TechniSat CONNECT app. The standard PIN is: 1234. The
TechniSat CONNECT app can be loaded free from the usual app stores.
Select [Delete network profile], to delete WiFi connections no longer
required.
Select [Reset settings] to clear all current Internet settings.
Select [Allow WiFi connection in standby mode] if the WiFi connection
should be retained in standby mode as well. This setting increases power
consumption but enables app control via the TechniSat CONNECT app
(switching on from Standby mode).
19.4 Time settings
> Press the MENU button and then select [System Settings] > [Time and
Date].
> Select [Time/Date Setting] to set the time and date manually.
Use the OK button to select a value. Change it using the  or  buttons.
> Confirm by pressing OK.
> Select [Time Update] to determine whether the time update should be
automatic via DAB+, FM or Internet or whether you would like to enter it
manually.
> To do this, select [DAB+ update], [FM update], [NET update] or [No
update].
> Under the [Set format] option you can activate 12 or 24 hour format.
Confirm your selection with the OK button.
DE
EN
NL
79