TechniSat MULTYRADIO 600 CD IR Manual page 75

> Using the
the storing.
> Then [PO2] is displayed for the second track which you can also add as
described above.
> When programming is complete, press the Playback/Pause button
play.
To delete programming, either press Stop
the Eject button.
16 Audio input
You can play sound from an external device via the MULTYRADIO 600 CD IR
speakers.
> Connect the external device to the AUX-IN port (19, 3.5 mm stereo jack) on
the back of the MULTYRADIO 600 CD IR.
> Use the MODE button to select the AUX-IN audio input. [Aux-In] appears on
the display.
The playback is controlled on the external device. Do not set the volume too
low to prevent interference.
17 Other functions
17.1 Sleep function
> Press the MENU button and then select [Main Menu > Sleep]. Alternatively:
Press the SLEEP button (2).
> You can use the  or  buttons to set the period for Sleep off in 15, 30, 45
or 60 minute intervals, after which the device switches to standby while in
any operating mode.
A moon symbol appears in the status bar of the display with the time still
available until the MULTYRADIO 600 CD IR switches to standby.
17.2 Alarm
> Press the MENU button and then select [Main Menu > Alarm].
Alternatively:
Press the Alarm 1 or Alarm 2 (25) button to jump straight to alarm configuration.
17.2.1 Setting the alarm time
The alarm function cannot be operated until the correct time has been set.
Depending on the configuration, this either happens automatically or will need
to be set manually. The time can either be updated manually, via DAB+/FM or
via the Internet. For more information, see Section 19.4.
/ buttons, select a track and press the OK button to accept
2x or open the CD tray using
to
DE
EN
NL
75