External Connections & Controls - Telex Audiocom BP-2002 Operating Instructions Manual

Connections and Controls
EXTERNAL CONNECTIONS & CONTROLS
NOTE: The numbers refer to the callouts in Figure 1.
1. V C : Use this control to adjust the
OLUME ONTROL
headset listen level.
2. C B
HAN UTTON AND
on the BP-2002) allows the user to select which
intercom channel is active. The yellow indicator next
to the 1 or 2 lights to show the active channel. Press
the Chan button to change the channel selection, the
yellow indicator for that channel will light.
3. C B I
ALL UTTON AND NDICATOR
user to send or receive signals to other devices on the
intercom channel selected. The Call button operates
in two ways:
Call receive : When there is an incoming call signal,
the indicator is red. (If Audible Call Alert is enabled,
incoming calls will cause beeps in the headset.) On
the BP-2002, calls can be received on the selected
channel only.
Call send : To send a call signal to all stations on a
channel, press and hold the Call button until a verbal
response is received. The indicator will glow red. On
the BP-2002, calls can be sent on the selected
channel only.
4. T B I
ALK UTTON AND NDICATOR
the headset microphone and operates in two ways:
I : The Chan button (only
NDICATORS
: The Call function allows the
: The Talk button activates
7