Roger Beep/Key Beep; Smart Key - Uniden UH825 Series Owner's Manual

Operation | Menu Functions
Roger Beep
Roger Beep automatically adds a sign-off tone to the end of
transmissions.
1. Press [MENU/MON] 13 times to select Roger Beep.
2. Scroll to select ON or OFF using [
3. Save the setting by pressing and holding [SCAN/MEM].
Key Beep
Key Beep is the tone sounded after a key press.
1. Press [MENU/MON] 15 times to select Key Beep.
2. Scroll to select ON or OFF using [
3. Save the setting by pressing and holding [SCAN/MEM].
Battery Save
1. Press [MENU/MON] 16 times to select Battery Save.
2. Scroll to select ON or OFF using [
3. Save the setting by pressing and holding [SCAN/MEM].

Smart Key [--]

Press and hold [--] to select and enter three Smart key functions.
NRC funciton
PRI function
CALL function
Short press [--] to active NRC, then select NRC Level from [MENU].
Short press [--] to active PRI, PRI channel display, press again to off.
Short press [--] to send CALL, 30s waiting time between each [CAL].
UNIDEN UH825
] or [ ].
] or [ ].
] or [ ].
25
Handheld UHF-CB Transceiver