Table of Contents
Advertisement
Operation | Menu Functions
Menu Functions
01 Transmit Power Level
02 Squelch
03 CTCSS / DCS
04 Priority Watch
05 Priority Channel (if 04
is ON)
06 Scan Mode
07 Master Scan
08 Master Code
To use the MENU:
1. Press [MENU/MON] to enter the menu or setting.
2. Press [
] or [
3. Save setting changes by pressing and holding [SCAN/MEM].
The radio will exit the menu after 3 seconds if no key is pressed.
CTCSS / DCS
CTCSS (Continuous Tone Coded Squelch System)
The CTCSS squelch codes allows a group to talk to each other without
hearing other users on the same channel. The group needs to use the
same code. And as there are 38 CTCSS codes available the chances of
nearby users using the same code is unlikely.
DCS (Digital Coded Squelch)
DCS is a digital version of CTCSS. It provides 104 extra, digitally coded
squelch codes that follow after the 38 CTCSS codes. Follow the steps
for changing CTCSS code but select a DCS code as desired.
To use CTCSS or DCS:
1. Press [MENU/MON] 3 times to select CTCSS/DCS.
UNIDEN UH825
] to select the Menu item you want to view.
09 Duplex Mode (Rep.)
10 NRC Level
11 VOX Setting
12 BCL
13 Call Tone
14 Roger Beep
15 Backlight
16 Key Beep
17 Battery Save
22
Handheld UHF-CB Transceiver
Advertisement
Table of Contents
