Charging The Radio | Dual Drop-In Charger (Uh825 Only); Charging The Radio | Single Radio Charging - Uniden UH825 Series Owner's Manual

Getting Started
Charging the Radio | Dual Drop-in Charger
(UH825-2TP Only)
Plug the AC adapter into a wall outlet and connect the USB-C charge
cable to the AC adaptor and the drop-in charger.
If you use the drop-in charger in a mobile vehicle with 12V DC power,
use the optional cig-lead adaptor.
When the charger is powered, the LED illuminates red.
When fully charged, the LED illuminates green.
Your radio is powered by a specially designed Lithium Ion battery pack.
For the initial battery charge, make sure the radio is off for
optimum charging.
NOTE
1. Place the UH825 in the drop-in charger.
2. If the radio battery is charging, the LED illuminates red and stays on,
until fully charged, then it illuminates green.
• The charger won't overcharge the battery pack.
When charging is completed, the charge LED changes colour from red
to green.
• You can monitor incoming calls while the UH825 is in the drop-in
charger however, optimum charging happens when the radio is off.
• Do not transmit when the UH825 is in the drop-in charger!

Charging the Radio | Single Radio Charging

A single UH825 Radio can be charged directly with the USB-C cable
connected to a standard 5V USB charging port.
UNIDEN UH825
9
Handheld UHF-CB Transceiver