Priority Watch/Priority Channel; Vox (Built-In Voice Activated Circuit) - Uniden UH825 Series Owner's Manual

Operation | Menu Functions
2. Press [ ] or [
• There are 38 CTCSS codes available.
• There are 104 DCS codes available
• To turn off CTCSS / DCS, select OFF.
3. Save the setting by pressing and holding [SCAN/MEM].
CTC or DCS icon, and the code number appears when a code is
selected for a channel.
Channels 5 and 35 are used for emergency channels.
CTCSS/DCS will not operate on these channels.
NOTE
Priority Watch (PRIWATCH)
1. Press [MENU/MON] 4 times to select Priwatch.
2. Press [ ] or [
3. Press and hold [SCAN/MEM] to save the setting and exit the menu.
Setting the Priority Channel (PRI CH)
1. After turning ON Priwatch, Press [MENU/MON] 5 times to select
Pri CH.
4. Press [ ] or [
5. Save the setting by pressing and holding [SCAN/MEM].

VOX (Built-in Voice Activated Circuit)

VOX is Voice activated transmission, no pressing of the PTT key.
For optimum performance, use VOX when the accessory earpiece is
connected. When VOX is turned on (levels 1-3) the earpiece microphone
is most sensitive at level 1, and least sensitive at level 3.
To use VOX:
1. Press [MENU/MON] 10 times to select VOX.
3. Press [ ] or [
4. Save the setting by pressing and holding [SCAN/MEM].
VOX icon appears at the bottom left of the LCD when a VOX setting is
enabled.
UNIDEN UH825
] to select a CTCSS or DCS code.
] to select OFF/ON. By default its OFF.
] to select CH 01-80. By default, ch-05 is PRI CH.
] to select a desired VOX level.
23
Handheld UHF-CB Transceiver