Page 1
UH8010NB Mini Compact UHF CB Transceiver For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
Contents Introduction Controls & Connectors Indicators Included with your UH8010NB Transceiver Connecting the Microphone Mounting the MIC Hanger Operation Turning on the Power Setting the Squelch Level Monitor Selecting a Channel Programming the Instant Priority Channel Recalling the Instant Channel...
Introduction The Uniden UH8010NB is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit.
Page 5
RJ45 type plug Channel Scan button Front MIC Jack Cover / Scan Memory (press & hold) Liquid Crystal Display (LCD) MIC - Front Microphone Jack Speaker Power Input Connection (13.8VDC) EXT SP - External Speaker Jack UNIDEN UH8010NB UHF CB Transceiver...
Included with your UH8010NB Transceiver Heavy Duty Owner’s Manual Microphone Hanger Microphone with screws, washers Mounting Bracket with DC Power Cord mounting screws with fuse Optional Accessories: • DECT MIC kit • UHF Antenna • External Speaker Visit the UH8010NB page on the website for more information on the availability of optional accessories; www.uniden.com.au for Australia www.uniden.co.nz for New Zealand...
Pull back the rubber cover and move it down along the cord. Using the flat blade of a screwdriver or similar object carefully push the lock tab of the MIC plug towards the MIC cord and at the same time tug on the MIC cord to draw back the MIC plug. UNIDEN UH8010NB UHF CB Transceiver...
High quality Double-Sided tape can be found at good retail stores. Secure the front and back pieces of the MIC Hanger using the supplied binding screws. Locate a suitable mounting position. Apply high quality Double-Sided tape onto the flat area of the MIC Hanger back piece and then press firmly to the mounting position. UNIDEN UH8010NB UHF CB Transceiver...
If the input voltage falls below 10VDC, dc Lo flashes for 5 seconds. The power turns off automatically if voltage falls below 8.5VDC. Switch your UH8010NB OFF and disconnect it from the power source, before locating the cause of the power supply problem. Setting the Squelch Level Press the Power/Channel Selector momentarily. SqL shows and the current squelch level will flash.
Page 11
If unwanted weak and noisy signals are getting through increase the squelch level (‘Squelch Gate’) to a medium level. Now only medium and strong signals get through. UNIDEN UH8010NB UHF CB Transceiver...
Programming the Instant Priority Channel Turn the Channel Selector to select the Priority Channel you prefer. Press and hold [INST] on the microphone for 2 seconds to store the new setting. icon appears. CALL INST UNIDEN UH8010NB UHF CB Transceiver...
If there is a barrier that partially blocks your transmitted signal, the probability of another radio receiving the signal is very slim. Hills, tall buildings, metallic structures,...etc tend to act as a screen between radios. UNIDEN UH8010NB UHF CB Transceiver...
Page 14
This operation is called “Duplexing”. For example, CH01 on Duplex Mode will Receive on CH01 but Transmit on CH31 CH02 on Duplex Mode will Receive on CH02 but Transmit on CH32 etc... If you transmit on CH01 Duplex mode, you are actually transmitting on CH31 the repeater station down-converts your signal and retransmits on CH01. UNIDEN UH8010NB UHF CB Transceiver...
Check with your local Retailer for information on available repeaters. NOTE Scanning The scan feature allows you to search for active channels automatically. The UH8010NB has two types of scanning; Open Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use the radio more effectively. 1. Press and Scanning starts. The icon appears.
To use GS Mode Scanning; 1. Press 3 times. Scn shows and the oS/GS setting flashes. 2. Turn the Channel Selector or press to change the setting to GS. 3. Press to store the setting. 4. Press and hold to save & exit the menu mode. GS Scanning checks the Instant Priority Channel for activity every 1.5 seconds. UNIDEN UH8010NB UHF CB Transceiver...
- o4). To turn off CTCSS/DCS select the oF code. 3. Press to store the setting. 4. Press & hold to save & exit menu mode. The CTCSS/DCS code displays for the selected channel. UNIDEN UH8010NB UHF CB Transceiver...
& exit menu mode. Selecting the Call tone 1. Press 5 times. The call tone setting flashes. 2. Turn the Channel Selector or press to change the setting between 1, 2, 3, 4 and 5. 3. Press to store the setting. 4. Press and hold to exit from the menu mode. UNIDEN UH8010NB UHF CB Transceiver...
2. Turn the Channel Selector or press to change the setting between Blue, Red, Purple(magenta), Green, Cyan, Yellow and Clear (white). 3. Press to store the setting. 4. Press and hold to exit from the menu mode. UNIDEN UH8010NB UHF CB Transceiver...
& exit menu mode. LCD Flip 1. Press 10 times. The Flip setting flashes. 2. Turn the Channel Selector or press to change the flip orientation. 3. Press to store the setting. 4. Press and hold to save & exit menu mode. UNIDEN UH8010NB UHF CB Transceiver...
The above situations are not a fault of the radio but a symptom of mixed wideband and narrowband radios in current use. It is expected that as older wideband radios are phased out this issue will be eliminated. UNIDEN UH8010NB UHF CB Transceiver...
Warranty UNIDEN UH8010NB UHF CB Transceiver IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case may be.
Page 27
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
Specifications AT-870 6.5dB ANTENNA BASE Frequency 476.42-477.40 MHz Elevated Feed Gain 6.5dB VSWR <1.5:1 for 477 MHz band above CONNECTOR Antenna Length 950 mm Impedance 50 Ohm 6.5dB Kit CABLE LEAD Polarization Vertical Radiation Omni directional Antenna Materials : Solid Fibreglass Rod, Brass, PE Heat Heavy Duty, Stainless Steel &...
Page 30
Congratulations on having selected the AT-870 477 MHz 2.0 FITTING THE BASE TUBE & SPRING ASSEMBLY INSTRUCTION FOR USE Antenna. This antenna system will allow you to gain good The exploded view overleaf shows the assembly of the performance in all types of terrain, when properly used. The 6.5dB antenna will provide the best performance for base and spring.
Need help?
Do you have a question about the UH8010NB and is the answer not in the manual?
Questions and answers