Operation
VOX (Voice Activated Transmit)
VOX is Voice activated transmission, no pressing of the PTT key.
For optimum performance, use VOX when the accessory earpiece is
connected. When VOX is turned on (levels 1-5) the earpiece microphone
is most sensitive at level 1, and least sensitive at level 5.
To use VOX:
1. Press [MENU] and then press [
2. Press [MENU] to select the option.
3. Press [
] or [
4. Press & hold [MENU] to store the setting and exit menu mode.
VOX icon appears on the display when a VOX setting is enabled.
VOX icon also appears in the Transceiver status when VOX initiates a
transmission.
Roger Beep
Roger Beep automatically adds a sign-off tone to the end of
transmissions.
1. Press [MENU] and then press [
highlighted.
2. Press [MENU] to select the option.
3. Press [
] or [
4. Press & hold [MENU] to store the setting and exit menu mode.
Key Beep
Key Beep is the tone that sounds after a key press.
1. Press [MENU] and then press [
highlighted.
2. Press [MENU] to select the option.
3. Press [
] or [
4. Press & hold [MENU] to store the setting and exit menu mode.
UNIDEN XTRAK 50 Series
] to select a desired VOX level.
] to select On or Off.
] to select On or Off.
] or [
] until 10 VOX is highlighted.
] or [
] until 13 Roger Beep is
] or [
] until 14 Key Beep is
26
Handheld UHF-CB Transceiver