Busy Channel Lockout; Roger Beep - Uniden UH8055S Owner's Manual

Operation

Busy Channel Lockout

If the channel is already in use, you can prevent
the UHF CB Radio from transmitting. This is
particularly important when using CTCSS/DCS.
1. Press [MENU] seven times.
The BCL (BUSYLOCK) setting flashes.
2. Turn the Rotary Channel Selector to change
the setting between ON or OFF.
3. Press and hold [MENU] to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UH8055S will
automatically exit the Menu Mode.
NOTE

Roger Beep

1. Press [MENU] eight times.
The roger beep (ROGER) setting flashes.
2. Turn the Rotary Channel Selector to
change the setting between ON or OFF.
3. Press and hold [MENU] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UH8055S will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8055S 30 UHF CB Transceiver