Roger Beep; Ctcss (Continuous Tone Coded Squelch System) - Uniden X66 Owner's Manual

Operation

Roger Beep

1. Press [MENU/ENTER] seven times.
2. Press /
setting between ON or OFF.
3. Press [MENU/ENTER] to store the
setting.
4. Press and hold [MENU/ENTER] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

CTCSS (Continuous Tone Coded Squelch System)

Press /
Press [DCS/CTCSS].
Press /
select the desired CTCSS code 01 - 38.
Press [DCS/CTCSS] once to store the new
setting.
To turn off CTCSS (or DCS) select the oFF code
during setting.
UNIDEN X66
to change the
the desired channel to use CTCSS.
on the Remote SPK/MIC to
26
UHF CB Transceiver