Getting Started; Attaching The Antenna & Beltclip - Uniden UH825 Series Owner's Manual

Getting Started

Attaching the Antenna
Attaching the Beltclip
The belt clip attaches to the battery pack and may be pre-installed for
convenience on some model packages.
To attach the belt clip:
1. Slide the belt clip into the catch at the top of the battery until it snaps
into place.
To remove the belt clip:
1. Pinch and hold the belt clip latch and then slide the belt clip up and
out of the catch. (Belt clip can be removed from the battery cover even
when installed in the radio.)
UNIDEN UH825
7
Handheld UHF-CB Transceiver