Internal Controls - Telex RadioCom BTR-200 II Operating Instructions Manual

DYNAMIC / ELECTRET
SWITCH
FCC ID: B5DTR200
S / N :
P / N : 7 0 6 8 1-
INTERNAL CONTROLS (Refer To Figure 7)
Belt Clip: Combination Belt Clip/Battery
Cover. Access to Battery Compartment, Micro-
phone Gain Control and Dynamic/Electret
Switch is accomplished by removal of belt clip
via a quick release 1/4 turn fastener.
Microphone Gain Control: Screwdriver ad-
justable by removing belt clip and prying out
the small rubber plug to the right of the screw
boss.
BATTERY COMPARTMENT
Internal Controls, TR-200
ACCESS TO MICROPHONE
GAIN CONTROL
MADE IN U.S.A.
MIC
D
E
Figure 7
Dynamic/Electret Switch: This switch allows
selection of "D" when using a Dynamic Micro-
phone or "E" when using an Electret Micro-
phone.
NOTE: All Telex headsets that are used with
this intercom are dynamic microphones. Unit
is shipped in the "D" position.
Battery Compartment: Holds 6 AA batteries
in a removable battery holder (supplied).
-12-