System Operation; Btr-200 Operation; Power; Local Headset Volume - Telex RadioCom BTR-200 II Operating Instructions Manual

POWER

If you have followed the instructions until this
point, you should now be ready to turn both the
TR-200 and the BTR-200 "ON".
Place the power switch on the BTR-200 in the
"ON" position. The red power on indicator
LED should illuminate.
OFF
Figure 30
Power ON/OFF - Volume Control Knob

SYSTEM OPERATION

BTR-200 OPERATION

ON

LOCAL HEADSET VOLUME

Adjust the volume control on the BTR-200 by
rotating theVolume control either clockwise or
counterclockwise as required for comfortable
listening volume.
LOCAL HEADSET VOLUME
Volume Control - BTR-200
PUSH TO TALK/LOCK-TO-TALK SWITCH
To enable the talk function on the BTR-200,
press and hold down on the talk button and be-
gin talking. Releasing the talk button will dis-
cont inue t he mi crophone audi o.
continuous talk, quickly press the talk button
twice. This enables the talk function as long as
you want. To release the talk function press the
talk button once more and the talk function
will cease.
NOTE: The talk LED will be illuminated
whenever the talk function is activated.
TALK LED
PUSH TO TALK
LOCK TO TALK SWITCH
Push-to-Talk/Lock-to-Talk Switch
-27-
INCREASES
VOLUME
Volume
Figure 31
BTR-200 II
Mic On Push Twice to Latch
Figure 32
F or