Rack Mounting - Telex RadioCom BTR-200 II Operating Instructions Manual

RACK MOUNTING

Install BTR-200 in Rack Enclosure: To rack
mount the BTR-200 base transceiver do the
following:
Remove the two #6-32 x 3/8" screws on each
side of the transceiver as shown in Figure 19.
Figure 19
Attaching Brackets For Rack Mounting
-19-
Place the rack mount brackets (supplied) on ei-
ther side of the unit and insert three #6-32 x
3/8" screws for each bracket. Tighten the
screws securely.
Insert the BTR-200 into your 19" rack enclo-
sure and insert four (4) #10-32 x 3/8" Phillips
pan head screws (supplied) in each corner of
the rack mount brackets and secure to your en-
closure.
REMOVE SCREWS
(TYPICAL BOTH SIDES)
# 6 - 32 X 3/8