Home - Kemppi MasterTig 335ACDC Operating Manual

For welding process and control panel feature descriptions, refer to "Welding processes and features" on page 66.
Control panel parameter adjustment:
• "Home" below
• "Start & stop sequence" on page 30
• "Settings" on page 32 .

3.2.1 Home

'Home' is the control panel work mode after the initial machine and control panel start-up. When Home is selected,
the welding current can be adjusted by turning the control knob.
To adjust welding current:
1. Press the Home button (11).
2. Turn the control knob (1) to adjust the current. Current (A) is shown on the display.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC
29/73
Operating manual - EN
1920900 / 1921