Kemppi MasterTig 335ACDC Operating Manual page 47

>> An alternative screen saver image can be used. For more information, refer to "Screen saver" on page 49.
Screen saver time: OFF / 1 min ... 120 min, step 1 min (Default = 5 min)
Date: Date setting (DD/MM/YYYY)
Time (24h): Time setting (HH:MM)
Language: Language setting
Factory reset... : Cancel / Start (Default = Cancel)
>> Settings item that activates the factory reset to restore factory settings on the device.
>> Once the factory reset is complete, the power source must be restarted manually.
* Current range adjustable by welder in TIG welding:
• 2 A ... 130 A, 1 A step (MasterTig 235, limited supply mode)
• 2 A ... 235 A, 1 A step (MasterTig 235)
• 2 A ... 305 A, 1 A step (MasterTig 325, 335)
• Default = Nominal value of the power source.
* Current range adjustable by welder in MMA welding:
• 8 A ... 85 A, 1 A step (MasterTig 235, limited supply mode)
• 8 A ... 185 A, 1 A step (MasterTig 235)
• 8 A ... 255 A, 1 A step (MasterTig 325, 335)
• Default = MMA maximum current of the power source.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC
47/73
Operating manual - EN
1920900 / 1921