Weld Assist automatically sets the following parameters for you:
•
Current mode: AC / DC-
•
Current: 3...300A or 3...230A depending on the machine used
•
Pulse (if used): Frequency
•
AC and Start & stop parameters: Set to default.
All these parameters can still be modified as per normal for the actual welding.
Weld Assist gives you a recommendation for these:
•
Shielding gas flow: "Argon" + l/min and "Helium" + l/min
•
Electrode: Diameter
•
Filler (if used): Material and diameter
•
Number of passes: Number and/or visualization
•
Travel speed: mm/min.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC
39/73
Operating manual - EN
1920900 / 1921