Table of Contents
Advertisement
Removing the display back-cover and
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the camera.
7. Remove the
display
panel.
8. Remove the
display
hinges.
9. Remove the
display
cable.
Procedure
About this task
After performing all the above steps, we are left with the display back-cover and antenna assembly.
128
Removing the display back-cover and antenna assembly
computer. After working inside your computer, follow the instructions in
antenna assembly
www.dell.com/
56
After working
Advertisement
Table of Contents
