Table of Contents
Advertisement
Removing the solid-state drive/Intel Optane
You need to disable the Intel Optane device before removing it from your computer. For more information about disabling the
Intel Optane device, see
Disabling Intel Optane
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
About this task
NOTE:
The M.2 card slot on your computer may support the following configurations:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
● M.2 2280 Intel Optane
NOTE:
Depending on the configuration installed, a thermal shield may be installed in your computer. If no thermal shield is
installed, skip steps 1 and 2.
Steps
1. Remove the screw that secures the thermal shield to the palm-rest and keyboard assembly.
2. Lift the thermal shield off the solid-state drive/Intel Optane.
46
Removing the solid-state drive/Intel Optane
memory.
computer. After working inside your computer, follow the instructions in
22
After working
www.dell.com/
Advertisement
Table of Contents
