Dell Inspiron 5584 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Inspiron 5584
  6. Service manual

Dell Inspiron 5584 Service Manual

Hide thumbs Also See for Inspiron 5584:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Inspiron 5584

Service Manual

Regulatory Model: P85F
Regulatory Type: P85F001

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Inspiron 5584 and is the answer not in the manual?

Questions and answers

Related Manuals for Dell Inspiron 5584

Summary of Contents for Dell Inspiron 5584

  • Page 1: Service Manual

    Inspiron 5584 Service Manual Regulatory Model: P85F Regulatory Type: P85F001...
  • Page 2 HOIATUS HOIATUS tähistab võimalikku omandi kahjustumist või inimeste vigastusi või surma. © 2018–2019 Dell Inc. või selle tütarettevõtted. Kõik õigused on kaitstud. Dell, EMC ja muud kaubamärgid on ettevõtte Dell Inc. või selle tütarettevõtete kaubamärgid. Muud kaubamärgid kuuluvad nende omanikele.

  • Page 3: Table Of Contents

    Contents 1 Enne, kui arvuti sees toimetama asute.................... 9 Enne alustamist..................................9 2 Pärast arvuti sees toimetamist.....................10 3 Ohutusjuhised..........................11 Elektrostaatilise lahenduse (ESD) kaitse..........................11 ESL-i välihoolduskomplekt..............................12 Tundlike komponentide transportimine..........................13 4 Soovitatud tööriistad........................14 5 Kruvide loend..........................15 6 Tagakaane eemaldamine......................17 Procedure....................................
  • Page 4 Prerequisites..................................31 Procedure....................................31 13 Traadita andmeside kaardi paigaldamine..................33 Procedure..................................... 33 Post-requisites..................................33 14 Ventilaatori eemaldamine......................34 Procedure..................................... 34 15 Ventilaatori paigaldamine......................35 Procedure ....................................35 16 Removing the solid-state drive/Intel Optane memory module............36 Procedure..................................... 36 17 Replacing the solid-state drive/Intel Optane memory module............38 Procedure to move the M.2 screw mount........................38 Procedure ....................................39 18 Removing the hard drive......................
  • Page 5 25 Jahutusradiaatori paigaldamine....................54 Procedure ....................................54 Post-requisites..................................54 26 Toiteadapteri pesa eemaldamine....................56 Ekraanisõlme eemaldamine..............................56 Prerequisites...................................56 Procedure..................................56 Procedure.....................................59 27 Toiteadapteri pesa tagasipanek....................61 Procedure .....................................61 Ekraanisõlme paigaldamine..............................62 Procedure ..................................62 Post-requisites................................64 28 S-/V-paneeli eemaldamine......................65 Prerequisites..................................65 Procedure.....................................65 29 S-/V-paneeli vahetamine......................68 Procedure ....................................68 Post-requisites..................................69...
  • Page 6 36 Ekraanisõlme eemaldamine......................78 Prerequisites..................................78 Procedure..................................... 78 37 Ekraanisõlme paigaldamine......................81 Procedure .....................................81 Post-requisites..................................82 38 Emaplaadi eemaldamine......................83 Prerequisites..................................83 Procedure..................................... 83 39 Emaplaadi paigaldamine......................87 Procedure..................................... 87 Post-requisites..................................89 Seerianumbri BIOS-i häälestusprogrammi sisestamine....................89 40 Randmetoe- ja klaviatuurikoostu eemaldamine................90 Prerequisites..................................90 Procedure.....................................90 41 Randmetoe- ja klaviatuurikoostu vahetamine................
  • Page 7 Post-requisites................................... 103 48 Removing the display hinges....................104 Prerequisites..................................104 Procedure................................... 104 49 Replacing the display hinges....................106 Procedure ..................................106 Post-requisites................................... 106 50 Ekraanikaabli eemaldamine...................... 108 Prerequisites..................................108 Procedure................................... 108 51 Ekraanikaabli paigaldamine....................... 109 Procedure ..................................109 Post-requisites................................... 109 52 Ekraani tagakaane ja antennimooduli eemaldamine..............
  • Page 8 Intel Optane’i mälu lubamine..............................119 Disabling Intel Optane memory............................119 Wi-Fi-toitetsükkel................................119 Jääkvoolu vabastamine..............................120 57 Getting help and contacting Dell....................121 Contents...

  • Page 9: Enne, Kui Arvuti Sees Toimetama Asute

    Enne, kui arvuti sees toimetama asute MÄRKUS The images in this document may differ from your computer depending on the configuration you ordered. Enne alustamist 1. Salvestage ja sulgege kõik avatud failid, pange kõik rakendused kinni. 2. Lülitage arvuti välja. Klõpsake nuppe Start > Toide >...

  • Page 10: Pärast Arvuti Sees Toimetamist

    Pärast arvuti sees toimetamist ETTEVAATUST Leaving stray or loose screws inside your computer may severely damage your computer. 1. Paigaldage kõik kruvid ja veenduge, et arvuti sisse pole jäänud ühtegi lahtist kruvi. 2. Ühendage kõik välisseadmed ja kaablid, mille eemaldasite, kui arvuti kallal töötama hakkasite. 3.

  • Page 11: Ohutusjuhised

    You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.

  • Page 12: Esl-I Välihoolduskomplekt

    • Käsitsege kõiki staatilise elektri suhtes tundlikke komponente antistaatilises piirkonnas. Võimaluse korral kasutage antistaatilisi põranda- ja töölauamatte. • Staatilise elektri suhtes tundliku komponendi pakendi avamisel ärge eemaldage komponenti antistaatilisest pakkematerjalist enne, kui olete valmis komponenti paigaldama. Enne antistaatilise pakendi eemaldamist maandage kindlasti oma kehast staatiline elekter. •...

  • Page 13: Tundlike Komponentide Transportimine

    Tundlike komponentide transportimine ESD-tundlike komponentide, näiteks varuosade või Dellile tagastatavate osade transportimisel tuleb need ohutuse huvides kindlasti asetada antistaatilistesse kottidesse. Tõsteseadmed Raskete seadmete tõstmisel pidage kinni järgmistest juhistest. ETTEVAATUST Ärge tõstke üle 23 kilo. Kasutage alati lisaressursse või mehaanilist tõsteseadet. 1.

  • Page 14: Soovitatud Tööriistad

    Soovitatud tööriistad Selles dokumendis kirjeldatud toimingute jaoks võib olla vaja järgmisi tööriistu. • Phillips screwdriver #1 • Flat-head screwdriver • Plastic scribe Soovitatud tööriistad...

  • Page 15: Kruvide Loend

    Kruvide loend MÄRKUS Komponendilt kruvide eemaldamisel on soovitatav kruvide tüüp ja kogus üles märkida ning kruvid hoiukarpi panna. See tagab, et komponendi tagasipanekul on kruvide arv ja tüüp sama. MÄRKUS Mõnel arvutil on magnetpinnad. Veenduge komponendi paigaldamisel, et kruvid ei jääks selliste pindade külge. MÄRKUS Kruvide värv võib erineda olenevalt tellitud konfiguratsioonist.
  • Page 16 Component Secured to Screw type Quantity Screw image System board Palm-rest and keyboard M2x3 assembly Touchpad bracket Palm-rest and keyboard M2x2 assembly Wireless-card bracket System board M2x3 Kruvide loend...

  • Page 17: Tagakaane Eemaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Remove the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws on the base cover.
  • Page 18 NOTE: The following steps are applicable only if you want to further remove any other components from your computer. 5. Disconnect the battery cable from the system board. Tagakaane eemaldamine...
  • Page 19 6. Press and hold the power button for 5 seconds to ground the computer and drain the flea power. Tagakaane eemaldamine...

  • Page 20: Tagakaane Paigaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Connect the battery cable to the system board, if applicable. 2. Place the base cover on the palm-rest and keyboard assembly, and snap the base cover into place.
  • Page 21 3. Replace the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly. 4. Tighten the two captive screws that secure the base cover to the palm-rest and keyboard assembly. Tagakaane paigaldamine...

  • Page 22: Aku Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Liitiumioonaku ettevaatusabinõud ETTEVAATUST • Olge liitiumioonakude käsitsemisel ettevaatlik.
  • Page 23 Aku eemaldamine...

  • Page 24: Patarei Asendamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Liitiumioonaku ettevaatusabinõud ETTEVAATUST • Olge liitiumioonakude käsitsemisel ettevaatlik.

  • Page 25: Post-Requisites

    Post-requisites Replace the base cover. Patarei asendamine...

  • Page 26: 10 Mälumoodulite Eemaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Kõlarite eemaldamine MÄRKUS Before working inside your computer, read the safety information that shipped with your computer and follow...

  • Page 27: Procedure

    Procedure NOTE: Depending on the configuration ordered, your computer may come installed with one or two memory modules. 1. Locate the memory module(s) on your computer. Mälumoodulite eemaldamine.
  • Page 28 2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops 3. Remove the memory module from the memory-module slot. Mälumoodulite eemaldamine.

  • Page 29: 11 Mälumoodulite Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Depending on the configuration ordered, your computer may come installed with one or two memory modules.

  • Page 30: Post-Requisites

    Post-requisites Replace the base cover. Mälumoodulite paigaldamine.

  • Page 31: Traadita Andmeside Kaardi Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1.
  • Page 32 Traadita andmeside kaardi eemaldamine...

  • Page 33: Traadita Andmeside Kaardi Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure CAUTION: To avoid damage to the wireless card, do not place any cables under it.

  • Page 34: Ventilaatori Eemaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Remove the display cable from the routing guides on the fan. 2. Disconnect the fan cable from the system board.

  • Page 35: Ventilaatori Paigaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard board assembly. 2. Replace the two screws (M2x3) that secure the fan to the palm-rest and keyboard board assembly.

  • Page 36: Removing The Solid-State Drive/Intel Optane Memory Module

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: The M.2 card slot on your computer may support the following configurations: •...
  • Page 37 4. Lift the solid-state drive/Intel Optane at an angle and remove it from the solid-state drive/Intel Optane slot. Removing the solid-state drive/Intel Optane memory module...

  • Page 38: Replacing The Solid-State Drive/Intel Optane Memory Module

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure to move the M.2 screw mount This computer supports two M.2 card form factors:...

  • Page 39: Procedure

    Procedure NOTE: The M.2 card slot on your computer may support the following configurations: • M.2 2230 solid-state drive • M.2 2280 solid-state drive • M.2 2280 Intel Optane NOTE: Depending on the configuration installed a thermal shield may be installed in your computer. If no thermal shield is installed skip steps 4 and 5.
  • Page 40 NOTE: If available, replace the thermal shield after replacing the solid-state drive/Intel Optane. 4. Align the screw hole on the thermal shield with the screw hole on the palm-rest and keyboard assembly. 5. Replace the screw (M2x3) that secures the thermal shield to the palm-rest and keyboard assembly. Replacing the solid-state drive/Intel Optane memory module...
  • Page 41 Replacing the solid-state drive/Intel Optane memory module...

  • Page 42: Removing The Hard Drive

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
  • Page 43 5. Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive. 6. Lift the hard-drive bracket off the hard drive. Removing the hard drive...

  • Page 44: Replacing The Hard Drive

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. Procedure 1.

  • Page 45: Post-Requisites

    4. Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest and keyboard assembly. 5. Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest and keyboard assembly. 6. Connect the hard-drive cable to the system board and close the latch to secure the cable. Post-requisites 1.

  • Page 46: 20 Kõlarite Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1.

  • Page 47: 21 Kõlarite Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the speakers.

  • Page 48: Puuteplaadi Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery.
  • Page 49 Puuteplaadi eemaldamine...

  • Page 50: Puuteplaadi Tagasipanek

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the gap on either sides of the touchpad is equal.

  • Page 51: Post-Requisites

    Post-requisites 1. Replace the battery. 2. Replace the base cover. Puuteplaadi tagasipanek...

  • Page 52: Kuumuseneelaja Eemaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. MÄRKUS The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.
  • Page 53 Kuumuseneelaja eemaldamine...

  • Page 54: Jahutusradiaatori Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. ETTEVAATUST Incorrect alignment of the heat sink can damage the system board and processor. MÄRKUS If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved.
  • Page 55 2. Replace the base cover. Jahutusradiaatori paigaldamine...

  • Page 56: Toiteadapteri Pesa Eemaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Ekraanisõlme eemaldamine MÄRKUS Before working inside your computer, read the safety information that shipped with your computer and follow...
  • Page 57 6. Lift the palm-rest and keyboard assembly at an angle. 7. Slide and remove the palm-rest and keyboard assembly off the display assembly. Toiteadapteri pesa eemaldamine...
  • Page 58 8. After performing all the above steps, you are left with display assembly. Toiteadapteri pesa eemaldamine...

  • Page 59: Procedure

    Procedure 1. Remove the three screws (M2.5x5) that secure the right hinge to the system board and palm-rest and keyboard assembly. 2. Lift the right hinge. 3. Disconnect the power-adapter port cable from the system board. 4. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 5.
  • Page 60 Toiteadapteri pesa eemaldamine...

  • Page 61: Toiteadapteri Pesa Tagasipanek

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the screw hole on the power-adapter port with the screw hole on the palm-rest and keyboard assembly. 2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.

  • Page 62: Ekraanisõlme Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and keyboard assembly.
  • Page 63 3. Using the alignment posts, press the hinges down on the system board and the palm-rest and keyboard assembly. 4. Replace the six screws (M2.5x5) that secure the left and right hinges to the system board and palm-rest and keyboard assembly. 5.

  • Page 64: Post-Requisites

    Post-requisites 1. Replace the wireless card. 2. Replace the base cover. Toiteadapteri pesa tagasipanek...

  • Page 65: V-Paneeli Eemaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites CAUTION: Disconnecting the I/O board resets the BIOS setup program’s settings to default. Before disconnecting the I/O board, it is recommended to note the BIOS setup program’s settings.
  • Page 66 3. Open the latches and disconnect the I/O-board cables from the system board. 4. Peel the I/O-board cables from the palm-rest and keyboard assembly. 5. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 6.
  • Page 67 S-/V-paneeli eemaldamine...

  • Page 68: V-Paneeli Vahetamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.

  • Page 69: Post-Requisites

    Post-requisites 1. Replace the hard drive. 2. Replace the battery. 3. Replace the base cover. S-/V-paneeli vahetamine...

  • Page 70: 30 Nööppatarei Eemaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. ETTEVAATUST Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.

  • Page 71: 31 Nööppatarei Ühendamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure With the positive-side facing up, snap the coin-cell battery into the battery socket on the I/O board. Post-requisites 1.

  • Page 72: Removing The Power-Button Board

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the fan.

  • Page 73: Replacing The Power-Button Board

    For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Using the clip and alignment posts, slide and adhere the power-button board and its cable to the palm-rest and keyboard assembly.

  • Page 74: Toitenupu Eemaldamine Sõrmejäljelugejaga

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. MÄRKUS Kehtib ainult arvutite puhul, mis on varustatud sõrmejäljelugejaga. Prerequisites 1. Remove the base cover.
  • Page 75 Toitenupu eemaldamine sõrmejäljelugejaga...

  • Page 76: Toitenupu Asendamine Sõrmejäljelugejaga

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. MÄRKUS Kehtib ainult arvutite puhul, mis on varustatud sõrmejäljelugejaga. Procedure 1. Place the power button into the slot on the palm-rest and keyboard assembly.
  • Page 77 3. Replace the battery. 4. Replace the base cover. Toitenupu asendamine sõrmejäljelugejaga...

  • Page 78: Ekraanisõlme Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 79 7. Slide and remove the palm-rest and keyboard assembly off the display assembly. 8. After performing all the above steps, you are left with display assembly. Ekraanisõlme eemaldamine...
  • Page 80 Ekraanisõlme eemaldamine...

  • Page 81: Ekraanisõlme Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on palm-rest and keyboard assembly.

  • Page 82: Post-Requisites

    Post-requisites 1. Replace the wireless card. 2. Replace the base cover. Ekraanisõlme paigaldamine...

  • Page 83: Emaplaadi Eemaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. MÄRKUS Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 84 3. Disconnect the power-adapter port cable from the system board. 4. Disconnect the speaker cable from the system board. 5. Open the latch and disconnect the keyboard from the system board. 6. Open the latch and disconnect the touchpad cable from the system board. 7.
  • Page 85 11. Remove the two screws (M2x2) that secure the system board to palm-rest and keyboard assembly. 12. Remove the two screws (M2x3) that secure the system board to palm-rest and keyboard assembly. 13. Lift the system board off the palm-rest and keyboard assembly. Emaplaadi eemaldamine...
  • Page 86 Emaplaadi eemaldamine...

  • Page 87: Emaplaadi Paigaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. MÄRKUS Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 88 5. Slide the first I/O-board cable into the connector on the system board and close the latch. 6. Slide the second I/O-board cable into the connector on the system board and close the latch. 7. Slide the hard-drive cable into the connector on the system board and close the latch. 8.

  • Page 89: Post-Requisites

    Post-requisites 1. Replace the heat sink. 2. Replace the fan. 3. Replace the solid-state drive/Intel Optane. 4. Replace the wireless card. 5. Replace the memory modules. 6. Replace the battery. 7. Replace the base cover. Seerianumbri BIOS-i häälestusprogrammi sisestamine 1. Lülitage arvuti sisse või taaskäivitage see. 2.

  • Page 90: Randmetoe- Ja Klaviatuurikoostu Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery.
  • Page 91 Randmetoe- ja klaviatuurikoostu eemaldamine...

  • Page 92: Randmetoe- Ja Klaviatuurikoostu Vahetamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure Place the palm-rest and keyboard assembly on a flat and clean surface. Post-requisites 1.
  • Page 93 9. Replace the speakers. 10. Replace the wireless card. 11. Replace the solid-state drive/Intel Optane. 12. Replace the fan. 13. Replace the battery. 14. Replace the base cover. Randmetoe- ja klaviatuurikoostu vahetamine...

  • Page 94: Removing The Display Bezel

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.

  • Page 95: Replacing The Display Bezel

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place. Post-requisites 1.

  • Page 96: Kaamera Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 97 Kaamera eemaldamine...

  • Page 98: Kaamera Paigaldamine

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Connect the camera cable to the camera module. 2. Adhere the tape that secures the camera cable to the camera module.
  • Page 99 4. Replace the base cover. Kaamera paigaldamine...

  • Page 100: Ekraanipaneeli Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 101 4. Lift the latch and disconnect the display cable from the display-panel cable connector. 5. Lift the display panel away from the display back-cover and antenna assembly. Ekraanipaneeli eemaldamine...

  • Page 102: Ekraanipaneeli Tagasipanek

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Place the display panel on a flat and clean surface. 2. Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable.

  • Page 103: Post-Requisites

    Post-requisites 1. Replace the display bezel. 2. Replace the display assembly. 3. Replace the wireless card. 4. Replace the base cover. Ekraanipaneeli tagasipanek...

  • Page 104: Removing The Display Hinges

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 105 Removing the display hinges...

  • Page 106: Replacing The Display Hinges

    For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the screw holes on the display hinges and brackets with the screw holes on the display back-cover and antenna assembly.
  • Page 107 5. Replace the base cover. Replacing the display hinges...

  • Page 108: Ekraanikaabli Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.

  • Page 109: Ekraanikaabli Paigaldamine

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure Route the display cable through the routing guides on the display back-cover and antenna assembly. Post-requisites 1.

  • Page 110: Ekraani Tagakaane Ja Antennimooduli Eemaldamine

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 111 Ekraani tagakaane ja antennimooduli eemaldamine...

  • Page 112: Ekraani Tagakaane Ja Antennimooduli Tagasipanek

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure Place the display back-cover and antenna assembly on a clean and flat surface. Post-requisites 1.
  • Page 113 7. Replace the wireless card. 8. Replace the base cover. Ekraani tagakaane ja antennimooduli tagasipanek...

  • Page 114: Seadme Draiverid

    Seadme draiverid Inteli kiibistiku tarkvara installimise utiliit Kontrollige seadmehalduris, kas kiibistikudraiver on installitud. Installige Inteli kiibistiku värskendused veebilehelt www.dell.com/support. Videodraiverid Kontrollige seadmehalduris, kas videodraiver on installitud. Installige videodraiveri värskendused veebilehelt www.dell.com/support. Draiver Intel Serial IO Kontrollige seadmehalduris, kas draiver Intel Serial IO on installitud.

  • Page 115: 55 Süsteemi Häälestus

    BIOS-i häälestusprogrammi sisenemine 1. Lülitage arvuti sisse (taaskäivitage) arvuti. 2. Käivitustesti ajal, mil kuvatakse DELL-i logo, oodake kuni ilmub F2 viip ja vajutage siis kohe klahvi F2. MÄRKUS F2 viip näitab, et klaviatuur on käivitatud. See viip võib tekkida väga kiiresti, seega tuleb seda tähelepanelikult oodata ja siis F2 vajutada.

  • Page 116: Cmos-I Sätete Kustutamine

    6. Ühendage akukaabel emaplaadiga. 7. Paigaldage tagakaas. BIOS-i (süsteemi seadistus) ja süsteemi paroolide kustutamine Süsteemi või BIOS-i paroolide kustutamiseks pöörduge Delli tehnilise toe poole, nagu on kirjeldatud veebilehel www.dell.com/contactdell. MÄRKUS Teavet Windowsi või rakenduste paroolide lähtestamise kohta vaadake Windowsi või asjakohaste rakenduste dokumentatsioonist.

  • Page 117: 56 Tõrkeotsing

    Vajadus BIOS-i välkmälu ülekirjutamiseks (värskendamiseks) võib tekkida, kui saadaval on värskendus või kui asendate emaplaadi. BIOS-i ülekirjutamiseks tehke järgmist. 1. Lülitage arvuti sisse. 2. 1. Avage aadress www.dell.com/support. 3. Klõpsake linki Product Support (Tugiteenused), sisestage oma arvuti hooldussilt ja klõpsake nuppu Submit (Edasta). MÄRKUS Kui teil pole hooldussilti, kasutage automaattuvastuse funktsiooni või otsige loendist üles arvuti mudel.

  • Page 118: Epsa-Diagnostika Käitamine

    ePSA-diagnostika käitamine 1. Lülitage arvuti sisse. 2. Arvuti algkäivituse ajal, kui kuvatakse Delli logo, vajutage klahvi F12. 3. Valige algkäivitusmenüü ekraanilt Diagnostics (Diagnostika). 4. Klõpsake noolt vasakus alanurgas. Kuvatakse diagnostika avaleht. 5. Lehe kirje avamiseks klõpsake noolt paremas alanurgas. Tuvastatud üksused kuvatakse loendina. 6.

  • Page 119: Intel Optane'i Mälu Lubamine

    • Väljas – kaamera ei ole kasutuses. Suurtäheluku oleku märgutuli: näitab, kas suurtähelukk on lubatud või keelatud. • Ühtlane valge – suurtähelukk on lubatud. • Väljas – suurtähelukk on keelatud. Intel Optane’i mälu lubamine 1. Klõpsake tegumiribal otsinguvälja ja sisestage tekst Intel Rapid Storage Technology. 2.

  • Page 120: Jääkvoolu Vabastamine

    Jääkvoolu vabastamine Jääkvool on staatiline jääkelekter, mis jääb arvutisse ka pärast väljalülitamist ja aku eemaldamist. Järgmine protseduur selgitab, kuidas jääkvoolu vabastada. 1. Lülitage arvuti sisse. 2. Eemaldage toiteadapter arvuti küljest. 3. Hoidke toitenuppu 15 sekundit all, et jääkvool vabastada. 4. Ühendage toiteadapter arvutiga. 5.

  • Page 121: Getting Help And Contacting Dell

    Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 4. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com My Dell app...

Table of Contents